The durability of the hydraulic hammer, the use of the break-in period and maintenance is very critical. After the hydraulic hammer leaves the factory, there is generally a break-in period of about 60 hours (some are called the break-in period), which is stipulated by the manufacturer according to the technical characteristics of the hydraulic hammer at the early stage of use. The break-in period is an important part to ensure the normal operation of the hydraulic hammer, reduce the failure rate and prolong its service life.

But according to the current use of many people, some large hydraulic hammer users due to the lack of basic common sense, it does not pay special attention to the break-in period of new machinery it is used to the special technical requirements, so let their own hydraulic hammer in a long-term overload state, and ultimately lead to the service life of the hydraulic hammer is not long and inefficient, early obstacles, thus affecting the whole process of the project.

hydraulic hammer use users pay attention, do not think that machinery has a warranty period to treat and let their hydraulic hammer load work arbitrarily, the use and maintenance of the break-in period of the hydraulic hydraulic hammer should be given full attention.

Ltd. brings you the requirements for the use and maintenance of hydraulic hydraulic hammer during the break-in period, which can be summarized as: strengthen training, reduce the load, pay attention to inspection, and strengthen lubrication.

1, Because the hydraulic hammer is special equipment, the operator should obtain certain operation and maintenance experience before operating the machine. Before operating the machine, be sure to read the manual of use and maintenance, and operate and maintain according to the requirements of the manual.

2, Pay attention to frequently check the quality of lubricating oil, hydraulic oil and coolant, and pay attention to check the sealing of the whole machine. At the same time, the lubrication of each lubrication point should be strengthened, and it is recommended that during the break-in period, the lubrication point should be filled with grease every shift (except for special requirements).

3, At the end of the break-in period, the machine should be mandatory maintenance, inspection and adjustment work, while paying attention to the replacement of oil.

Have you learned these methods? Shun Tian crusher reminds users to pay attention to and implement the maintenance and repair of the hydraulic crusher break-in period as required, it will reduce the occurrence of early failure and extend the service life.